Leica TPS1200 series Technical Reference Manual page 842

Determine Coordinate System - General
Description of fields
Field Option
<Default Method:> Normal or One
Pt Localistn
<Default Transfor- Onestep,
mation:> Twostep or
Classic 3D
TPS1200
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
PAGE (F6)
To change to another page on this screen.
Description
Method used to determine the coordinate system.
The fields and pages available are different if
<Default Method: Normal> is selected. Refer
to "37.3.1 Configuring Determine Coordinate
System - Normal" for information on how to
configure DET C SYS using the normal
method.
The default transformation to be used when deter-
mining the coordinate system. Refer to "10.2 Termi-
nology".
842