Leica TPS1200 series Technical Reference Manual page 871

DET C SYS
Transformation
Results,
Rotn Origin page
Determine Coordinate System - Normal
Field Option
<Rotation Y:> Output
<Rotation Z:> Output
<Scale:> Output
Next step
PAGE (F6) changes to the Rotn Origin page. Refer to paragraph "DET C SYS Transforma-
tion Results, Rotn Origin page".
Description of fields
Field Option
<Transf Model:> Output
<Rot Orig X:> Output
<Rot Orig Y:> Output
<Rot Orig Z:> Output
Description
Rotation around the Y axis.
Rotation around the Z axis.
Scale factor used in transformation. Either true scale
or ppm.
Description
Classic 3D transformation model used for the trans-
formation as defined in DET C SYS Configuration,
Classic 3D page.
Available for <Transf Model: Molodensky-Bad>.
Position in the X direction of the origin of rotation.
Available for <Transf Model: Molodensky-Bad>.
Position in the Y direction of the origin of rotation.
Available for <Transf Model: Molodensky-Bad>.
Position in the Z direction of the origin of rotation.
TPS1200 871