Leica TPS1200 series Technical Reference Manual page 1023

Field procedure
step-by-step
Reference Line
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "42.2 Accessing Reference Line" to access REFLINE Refer-
ence Line/Arc Begin.
2. REFLINE Reference Line/Arc Begin
Select a job and a configuration set with the settings mentioned
above.
3. CONT (F1) to access REFLINE Choose Task & Reference Line,
Reference page.
4. REFLINE Choose Task & Reference Line, Reference page
<Task: Gridstake Line>
<Ref to Use: Select from Job>
5. Highlight <Ref Line:>.
6. ENTER to access REFLINE Manage Reference Lines.
7. NEW (F2) to access REFLINE New Reference Line, Input page.
8. REFLINE New Reference Line, Input page
<Ref ID: Line001>
<Method: 2 Points>
Select the appropriate points from the choicelist.
TPS1200
Refer to
chapter
42.2
42.4.1
42.4.1
1023