Leica TPS1200 series Technical Reference Manual page 1004

Reference Line TPS1200
ALL (F1)
To measure the point being staked and return
to the REFLINE Enter Offset Values screen.
The last used values are displayed. The point
ID is incremented
ured point ID template
DIST (F2)
To measure and display distances. The differ-
ence between the current position and the
point being staked is displayed.
REC (F3)
To record displayed values.
2FACE (F4)
To take a measurement in Face I and Face II.
The point stored is an average of the two
measurements.
When using instruments fitted with ATR, the
point is automatically measured in both faces,
the resulting point is stored and the instrument
is returned to the first face.
This hotkey is only available for <EDM Mode:
Standard> and <EDM Mode: Fast> and in the
Survey, Reference Line and Stakeout
programs.
SURVY (F5)
To measure a point. Accesses REFLINE
Measure Points. Refer to "42.5 Measuring to
a Reference Line/Arc".
1004
according to the config-
.