Leica TPS1200 series Technical Reference Manual page 1134

Setup
Description of fields
Field Option
<Point ID:> Choicelist
<Reflector Ht:> User input
<Azimuth:> Output
<V:> Output
<Slope Dist:> Output
TPS1200
SHIFT FIND (F2)
Available once sufficient data is available for
calculation. Accesses SETUP Find Target to
guide the reflector to the selected target point.
Refer to "45.8 Finding a Target Point" for infor-
mation on this screen.
SHIFT POSIT (F4)
Available once sufficient data is available for
calculation. To position the instrument to the
selected target point.
Description
The point ID of the target point to be measured. All
points from <Fixpoint Job:> can be selected, except
class NONE.
The default reflector height as defined in the active
configuration set is suggested.
The current horizontal angle.
The current vertical angle.
The measured slope distance after DIST (F2) was
pressed.
1134