Leica TPS1200 series Technical Reference Manual page 1061

Hide thumbs Also See for TPS1200 series:

Table of Contents

Sets of Angles

No Time Out There is no automatic closure of message dialogs.

Only the message dialog relating to the exceeding of

tolerances is displayed and is closed as defined by the

settings in <Time Out:>.

No message dialogs are displayed except for

specific warnings.

Specific warnings which affect the instrument and

it's ability to continue with the monitoring process

will be displayed and will remain on the screen.

These include the overheating of the instrument,

low battery levels, unavailable space on the

CompactFlash card.

To define the time delay for the automatic closing of

message dialogs during a measurement set. This

choicelist is not available when <Stop For: Never>.

When a message dialog appears, it is only closed by

pressing YES (F4).

All message dialogs are automatically closed as

defined by these individual time settings.

This input field is only available when Monitoring is

registered through the licence key.

Automatic monitoring of target points is activated.

Automatic monitoring of target points is not activated.

The Sets of Angles application will apply.