Leica TPS1200 series Technical Reference Manual page 941

Test or prove hidden
points step-by-step
Hidden Point
Step Description
SHIFT INDIV (F5) for an individual point ID independent of the ID
template. SHIFT RUN (F5) changes back to the next ID from the
configured ID template.
10. PAGE (F6) to change to Code page.
11. HIDDEN PT Hidden Point Result, Code page
<Point Code:> The thematical code. All codes of the job can be
selected.
<Atttribute n:> The attributes for the thematical code. The behaviour
of the fields depend on their definition in the codelist.
Type in a code if required.
12. PAGE (F6) to change to Plot page.
13. HIDDEN PT Hidden Point Result, Plot page
Measured distances are indicated by solid arrows.
14. STORE (F1) to store the hidden point.
Step Description
1. Set up and orient the instrument in an open area.
2. Repeat steps 1. to 3. from paragraph "Measuring hidden point step-
by-step".
3. Configure the hidden point rod.
TPS1200
Refer to
chapter
16.2
34.6
Refer to
chapter
41.3
941