Leica TPS1200 series Technical Reference Manual page 1301

Volume Calculations
Volume Calculations
menu options
Step 3)
Compute Volume
Step 4)
End Volume Calculations
Next step
IF
to start the program
to configure the program
to close the program
Description
To compute the volume of a surface by a refer-
ence (3D point, entered elevation) or by the
stockpile method.
To end Volume Calculations and return to the
screen from where Volume Calculations was
accessed.
THEN
highlight the relevant option and press CONT (F1).
Refer to the chapters stated above.
press SHIFT CONF (F2).
Refer to "52.3 Configuring Volume Calculations".
highlight End Volume Calculations and press CONT (F1).
TPS1200
Refer to
chapter
52.4.3
1301