Leica TPS1200 series Technical Reference Manual page 1050

Hide thumbs Also See for TPS1200 series:

Table of Contents

Reference Plane & Face Scan

For <Start Pt ID: RMS> and <Pt ID Inc: 10> the points are <Point

ID: RMS>, <Point ID: RMS10>, <Point ID: RMS20>, ..., <Point

ID: RMS100>, ...

For <Start Pt ID: 100> and <Pt ID Inc: 10> the points are <Point

ID: 100>, <Point ID: 110>, ..., <Point ID: 200>, <Point ID: 210>,

For <Start Pt ID: abcdefghijklmn89> and <Pt ID Inc: 10> the

points are <Point ID: abcdefghijklmn99>, point ID incrementing

<Scan Area:> Size of the area to be scanned.

<Estimated Pts:> Estimated number of points to be scanned.

START (F1) to access REFPLANE Scanning Status, Scanning

PAUSE (F3) to pause the scanning of points.

SCAN (F3) to continue scanning.

STOP (F1) to stop the scanning of points.

REFPLANE Scanning Status, Scanning page

Status of the scanning is displayed when under process.

<Pts Scanned:> Number of points being scanned.

<Pts Remaining:> Number of points remaining to be scanned.

<Pts Rejected:> Number of skipped points.

<% Completed:> Percentage of points scanned.