Determine Coordinate System - General
IF
AND
<Method:
the application
program needs
One Pt Localistn>
configuring
<Method: Normal> the application
program does
not need
configuring
<Method:
the application
program does
One Pt Localistn>
not need
configuring
TPS1200
THEN
CONF (F2) to access DET C SYS Configuration.
Refer to "37.3.2 Configuring Determine Coordinate
System - One Point Localisation".
CONT (F1) to access DET C SYS Step 1: Choose
Transform Type. Refer to "38 Determine Coordinate
System - Normal".
CONT (F1) to access DET C SYS Step 1: Choose
Transform Type. Refer to "39 Determine Coordinate
System - One Point Localisation".
834