Leica TPS1200 series Technical Reference Manual page 1150

Setup
SETUP
Results,
Plot page
Column Description
∆Dist Can be displayed by pressing
Difference between calculated and measured distance from the
station to the target points. If a target point does not have coordinates,
----- are displayed. Differences exceeding the defined limit are indi-
cated by a *.
∆Height Can be displayed by pressing
Difference between calculated and measured height of the target
points. If a target point does not have a height coordinate, ----- are
displayed. Differences exceeding the defined limit are indicated by a
*.
∆East Can be displayed by pressing
Difference between fixpoint and measured point, calculated from new
station coordinates.
∆North Can be displayed by pressing
Difference between fixpoint and measured point, calculated from new
station coordinates.
Next step
PAGE (F6) changes to the Plot page.
Refer to "34.6 Plot Mode - MapView Screen Area" for details on the keys on the Plot page.
Next step
PAGE (F6) changes to the first page on this screen.
TPS1200
MORE (F5).
MORE (F5).
MORE (F5).
MORE (F5).
1150