Leica TPS1200 series Technical Reference Manual page 1109

Setup
Screen display
OCUPY (F1)
To start logging of static observations. The
position mode icon changes to the static icon.
(F1) changes to STOP.
STOP (F1)
To end logging of static observations when
enough data is collected. When <Auto STOP:
Yes> in CONFIGURE Point Occupation
Settings, logging of static observations ends
automatically as defined by the stop criteria.
The position mode icon changes to the moving
icon. (F1) changes to STORE.
STORE (F1)
To store the measured point. When <Auto
STORE: Yes> in CONFIGURE Point Occupa-
tion Settings, the measured point is stored
automatically. (F1) changes to OCUPY.
It may happen that a point with the same point
ID exists in the job.
SHIFT CONEC (F3) and SHIFT DISCO (F3)
To dial the number of the reference station
configured in the active configuration set and to
hang up immediately after the survey is
completed. Available for
devices of type digital cellular phone or
modem. Available for <Auto CONEC: No> in
CONFIGURE GSM Connection.
TPS1200
GPS
real-time
1109