Leica TPS1200 series Technical Reference Manual page 837

DET C SYS
Configuration,
Residuals page
Determine Coordinate System - General
Field Option
<Default Height Orthometric
Mode:> or Ellipsoidal
<Default Match:> Pos & Height,
Pos Only,
Height Only or
<None>
Next step
PAGE (F6) changes to the Residuals page. Refer to paragraph "DET C SYS Configuration,
Residuals page".
Description of fields
Field Option
<Easting:> User input
<Northing:> User input
<Height:> User input
<Default Residual
Distbtn:>
Description
The default height type to be used when determining
the coordinate system.
Options available depend on the choice made for
<Default Transformation:>. Point parameters to be
matched between points in both datums.
Description
The limit above which Easting residuals will be
flagged as possible outliers.
The limit above which Northing residuals will be
flagged as possible outliers.
The limit above which Height residuals will be
flagged as possible outliers.
The method by which the residuals of the control
points will be distributed throughout the transforma-
tion area.
TPS1200 837