Leica TPS1200 series Technical Reference Manual page 982

Reference Line
Description of all fields from the Slope Display Mask
Field Description
<Chainage:> Displays the current chainage.
<Current Slope:> Displays the current slope of the reflector position to the hinge.
<Design Slope:> Displays the slope grade as defined by the user.
<East:> Displays the Easting coordinate of the current reflector position.
<Height:> Displays the Height value of the current reflector position.
<North:> Displays the Northing coordinate of the current reflector position.
<Point ID:> To enter the point ID.
<Reflector Ht:> To enter the reflector height.
<SD to Hinge:> Displays the slope distance offset from the hinge to measured point.
<SD to Line:> Displays the slope distance offset from line/arc to measured point.
<Slope Cut/Fill:> Displays the value of the difference between the actual reflector
elevation to the slope elevation at that position. A cut is above the
slope. A fill is below the slope.
<Start Chainage:> Displays the starting chainage as defined by the user.
<∆Height Hinge:> Displays the delta height from the current position to the hinge.
<∆Height Line:> Displays the delta height from the current position to the line/arc.
<∆Line/Arc:> Displays the horizontal distance from the start point of the line/arc to
the base point of the measured point, along the line/arc.
<∆Line/Arc-End:> Displays the horizontal distance from the end point of the line/arc to
the base point of the measured point, along the line/arc.
TPS1200 982