Leica TPS1200 series Technical Reference Manual page 1092

Hide thumbs Also See for TPS1200 series:

Table of Contents

This type of setup is the traditional type. The

user must always measure all setup points

consecutively to complete the setup. The

TPS station coordinates and TPS orientation

must be set before measuring survey points.

Fixpoints=Meas All Now must be set.

This setup allows the user to measure setup

points and survey points as they work or

"on the fly". The TPS station coordinates and

TPS orientation do not have to be set before

measuring survey points. This can be done

at anytime during the survey.

Fixpoints=Add Points Later must be set.

This setup can only be used when meas-

uring survey points. When staking out points,

the TPS station coordinates and TPS orien-

tation must first be set.

"On-the-Fly"