Leica TPS1200 series Technical Reference Manual page 1043

Reference Plane & Face Scan
Step Description
11. REFPLANE New Reference Plane, Offset page
<Define Offset:> An offset can be defined by a point or a distance.
The defined plane is shifted along the Y axis by the offset.
<Offset PtID:> Available for <Define Offset: By Point ID>. Point ID
of offset point.
<Offset:> Distance by which to offset the plane along the Y axis.
For <Define Offset: By Distance> the distance can be entered.
For <Define Offset: By Point ID> the calculated distance to the
adjusted plane is displayed. <Offset:-----> if no values are available.
OFSET (F5) Available for <Offset PtID:> being highlighted. To
access REFPLANE Survey: XX, Survey page. Measure a point to
define the offset point.
12. PAGE (F6) to change to the Plot page.
13. REFPLANE New Reference Plane, Plot page
Points displayed depend on the settings in REFPLANE Configura-
tion, Parameters page. Points defining the plane are displayed in
black, the other points are displayed in grey.
SHIFT FACE (F1) to access the face view of the plane.
SHIFT PLAN (F1) to access the plan view of the plane.
14. STORE (F1) to compute and store the reference plane.
TPS1200
Refer to
chapter
43.3
1043