Leica TPS1200 series Technical Reference Manual page 1229

Example for offset point
ID's
Survey - Auto Points
Next step
IF THEN
offset point configu- CONT (F1) to return to SURVEY Survey: Job Name.
ration is finished
a second offset point PAGE (F6) and then OFST2 (F2) or OFST1 (F2) to change to
is to be configured SURVEY Auto Points - Offset for the second point.
The offset point ID is a combination of the auto point ID and an identifier as prefix or suffix.
The right most part of the auto point ID is incremented within the point ID. The auto point ID
is truncated from the left if the length of the auto point ID plus identifier prefix or suffix is
greater than 16 characters.
Auto point ID
Auto1234
Auto1235
Auto1234
Auto1235
Refer to "16.1 ID Templates" for more information on point ID's.
Identifier Prefix/Suffix
OS1 Prefix
OS1 Suffix
TPS1200
Offset point ID
OS1Auto1234
OS1Auto1235
...
Auto1234OS1
Auto1235OS1
...
1229