Updating A Coordinate System - Leica TPS1200 series Technical Reference Manual

Determine Coordinate System - Normal
38.3
Access step-by-step

Updating a Coordinate System

Step Description
1. Refer to "37.2 Accessing Determine Coordinate System" to access DET C SYS
Determine Coord System Begin.
2. Select <Method: Normal>.
3. Enter the name of a coordinate system in <Name:>
OR
CSYS (F6) to select a coordinate system.
4. CONT (F1) to access DET C SYS Step 3: Match Points (n).
5. All the following steps are identical with the determination of a new coordinate
system from DET C SYS Step 3: Match Points (n) onwards.
Refer to "38.2 Determining a New Coordinate System". Follow the instructions
from paragraph "DET C SYS Step 3: Match Points (n)" onwards.
]
TPS1200 862