Leica TPS1200 series Technical Reference Manual page 1128

Setup
Field Option
<∆Height:> Output
<Horiz Dist:> Output
<Height:> Output
Next step
IF
the next page is to be accessed
the station and orientation is to be set
TPS1200
Description
The difference between the coordinate height of the
backsight point and the measured height of the back-
sight point. If the backsight point is a 2D point, this
field shows -----.
Displayed after a distance was measured with DIST
(F2) and after MORE (F5) was pressed. The meas-
ured horizontal distance to the backsight point.
Shows ----- before DIST (F2)
Displayed after a distance was measured with DIST
(F2) and after MORE (F5) was pressed. The meas-
ured height of the backsight point. Shows ----- before
DIST (F2)
THEN
PAGE (F6) changes to the BS Info page.
SET (F1) to set the station and orientation.
1128
.