Leica TPS1200 series Technical Reference Manual page 963

Reference Line
Field Option
Measure to
Line or
Measure to
Arc
Stake to Line
or Stake to Arc
Gridstake Line
or
Gridstake Arc
<Method:>
2 Points
Pt/Brg/Dst/Gra
de
Pt/Brg/Dst/∆Ht The same as above but uses the difference in height
3 Points
2
Points/Radius
<Start Point:> Choicelist
Description
Calculates the coordinates of a point from it's posi-
tion relative to the reference line/arc.
Allows points to be staked relative to the reference
line/arc.
Allows a grid to be staked out relative to the refer-
ence line/arc.
The method by which the reference line/arc will be
defined.
• For <Task: XX Line>
Uses two known points to define the reference line.
Defines the reference line using a known point, a
distance, an azimuth and the gradient of the line.
instead of the gradient.
• For <Task: XX Arc>
Defines the reference arc using three known points.
Defines the reference arc with two known points and
a known radius.
The start point of the reference line/arc. All points
from REFLINE Data: Job Name can be selected.
TPS1200 963