Sets of Angles
Step
Description
•
If yes, continue with step 3.
•
If no, continue with step 5.
3.
SHIFT GETPT (F4) to access SETS Data: Job Name.
4.
SETS Data: Job Name
Highlight the desired point and CONT (F1) to access SETS Select Points.
Continue with step 6.
5.
Type in <Point ID:> if new or different point ID is required.
6.
CONT (F1) to access SETS Select Points - Survey.
7.
SETS Select Points - Survey
ALL (F1) to measure and store angles and distance and return to SETS Define
Points For Set.
8.
Repeat step 2. to step 7. until all points are selected
9.
DONE (F5) to end selection of points.
If <Auto Survey: On>, instruments with ATR automatically measure the selected points in
the second face of the first set.
TPS1200
1070