Leica TPS1200 series Technical Reference Manual page 1190

Stakeout
Field Option
<Height:> or <Ht:> Output
<Design Ht:> or User input
<D Ht:>
TPS1200
Description
Available for <Edit Height: No> in STAKEOUT
Configuration, Heights page.
The height of the current position is displayed as
orthometric height. If the orthometric height cannot be
displayed, the local ellipsoidal height is displayed. If it
is not possible to display the local ellipsoidal height,
the WGS 1984 height is displayed. The value for
<Height Offset:> configured in STAKEOUT Config-
uration, Heights page is taken into account.
Available for <Edit Height: Yes> in STAKEOUT
Configuration, Heights page.
The design height, which is the height of the point to
be staked, is displayed as orthometric height. If the
orthometric height cannot be displayed, the local
ellipsoidal height is displayed. If it is not possible to
display the local ellipsoidal height, the WGS 1984
height is displayed. The value for <Height Offset:>
configured in STAKEOUT Configuration, Heights
page is not taken into account.
Changing the value for <D Ht:> changes the values
displayed for <CUT:> and <FILL:>.
1190