Staking Out In Polar Mode - Leica TPS1200 series Technical Reference Manual

Stakeout
46.4.4
Description
Diagram
Access
STAKEOUT
Polar Stakeout,
Stake page

Staking Out in Polar Mode

The stakeout elements are a direction from the station, a horizontal distance and a cut/fill.
The range information is calculated from the current position to the point to be staked in refer-
ence to the station.
P0
TPS12_106
<Stake Mode: Polar> is configured in STAKEOUT Configuration, General page. Refer to
"46.3 Configuring Stakeout".
Refer to "46.2 Accessing Stakeout" to access STAKEOUT Polar Stakeout.
The pages shown are those from a typical configuration set. An additional page is available
when a user defined display mask is used.
The keys are identical with those in STAKEOUT Orthogonal Stakeout, Stake page. Refer
to "46.4.3 Staking Out in Orthogonal Mode" for information on the keys.
TPS1200
P1
a
P0 Station
P2
b
P1 Current position
c
P2 Point to be staked
a
b
c
∆
< DISTANCE:>
∆
< HZ:>
<CUT:> or <FILL:>
1188