Leica TPS1200 series Technical Reference Manual page 1189

Stakeout
Description of fields
Field Option
<Point ID:> Choicelist
<Reflector Ht:> or User input
<hr:>
<∆ HZ:> Output
<∆ DISTANCE:> or Output
<∆ D:>
<CUT:> Output
<FILL:> Output
Description
The point ID of the point to be staked. Accesses
STAKEOUT Data: Job Name where points are
shown according to sort and filter settings and staked
points are indicated by .
The default reflector height as defined in the active
configuration set is suggested.
The difference of the horizontal angle from the point
to be staked to the current position.
The difference of the horizontal distance from the
point to be staked to the current position along the
line defined by current position and station.
The negative height difference from the height of the
current position to the height of the point to be staked.
The value for <Height Offset:> configured in
STAKEOUT Configuration, Heights page is taken
into account. Move down.
The positive height difference from the height of the
current position to the height of the point to be staked.
The value for <Height Offset:> configured in
STAKEOUT Configuration, Heights page is taken
into account. Move up.
TPS1200 1189