Leica TPS1200 series Technical Reference Manual page 1215

Hide thumbs Also See for TPS1200 series:

Table of Contents

Survey - Auto Points

Offset Cross

Offset Height Input field for the height offset of the measured point.

Offset Length Input field for the horizontal distance offset, in the

Output field for the horizontal angle.

Insert full line space.

Insert half line space.

Choicelist with instructions how the software should

flag a line/area. Refer to "9 Linework".

Output field for the number of auto points logged after

pressing START (F1) in SURVEY Survey: Job

Name, Auto page. Counting starts from 0 every time

START (F1) is pressed.

Output field for the North coordinate of the measured

Input field for the horizontal distance offset for the

measured point, perpendicular to the line of sight.

direction of line of sight.

Output field for the chosen reflector.

Input field for the reflector height.

Output field for the last recorded distance.