Leica TPS1200 series Technical Reference Manual page 1049

Reference Plane & Face Scan
Step Description
SHIFT CONF (F2) to access REFPLANE Configuration, Parame-
ters page.
3. REFPLANE Choose Task & Reference Plane
<Task: Scan>
<Plane to Use: Create New Plane>
4. CONT (F1) to access REFPLANE New Reference Plane
5. REFPLANE New Reference Plane
Define new reference plane. Refer to paragraph "Create reference
plane step-by-step".
6. STORE (F1) to store the new reference plane.
7. Define the first and second corner of the area to be scanned.
8. REFPLANE Define Scanning Parameters
For tilted and vertical planes:
<Horizontal:> Horizontal grid distance.
<Up Slope:> Up slope grid distance.
<Pt ID Inc:> The incrementation used for <Start Pt ID:>. No point ID
template used.
TPS1200
Refer to
chapter
43.3
1049