Leica TPS1200 series Technical Reference Manual page 1144

Hide thumbs Also See for TPS1200 series:

Table of Contents

Description of fields

To display additional information about the

accuracy of the measured target points and to

delete inconsistent measurements in the

SETUP Additional Information screen.

DONE (F5) (Applicable to Add Points Later)

To temporarily exit the Setup program. The

station setup will be incomplete but can be

continued and completed at a later time.

SURVY (F5) (Applicable to Meas All Now)

To access SETUP Measure Target and to

measure more target points.

To change to another page on this screen.

SHIFT ELL H (F2) or SHIFT ORTH (F2)

Changes between the ellipsoidal and the ortho-

metric height.

SHIFT 3 PAR (F2) or SHIFT 4 PAR (F2)

Switches between a 3 parameter and 4 param-

eter helmert calculation. The results are imme-

diately updated.

SHIFT OTHER (F5)

Available if two solutions were calculated.

Changes between these solutions.

Station ID of the current station set up.