Leica TPS1200 series Technical Reference Manual page 1027

Hide thumbs Also See for TPS1200 series:

Table of Contents

Defining a reference

Reference Plane & Face Scan

Instrument source

Reference planes are created using a right hand system. For two points defining a plane a

vertical plane is used. A reference plane is defined with the X axis and the Z axis of the plane.

The Y axis of the plane defines the positive direction of the Y axis. A reference plane can be

defined in the following ways.

Reference Plane

Ref Plane (Meas) or Ref

Plane (Face Scan Meas)

P0 Instrument station

P1 Point defining reference plane

P2 Point defining reference plane

P3 Point defining reference plane

P4 Measured point

P5 Measured point