Leica TPS1200 series Technical Reference Manual page 1200

Survey - General
Field Option
Output
<Config Set:> Choicelist
<Reflector:> Choicelist
<Add. Constant:> Output
Next step
CONT (F1) to access SURVEY Survey: Job Name, where measurements can be
performed with ALL (F1) or DIST (F2) and/or REC (F3).
TPS1200
Description
Codes have already been stored in the selected
<Job:>. If codes had been copied from a System
RAM codelist, then the name of the codelist is
displayed. If codes have not been copied from a
System RAM codelist but typed in, then the name of
the active job is displayed.
The active configuration set. All configuration sets
from Main Menu: Manage...\Configuration Sets
can be selected.
The active reflector. All reflectors from Main Menu:
Manage...\Reflectors can be selected.
The additive constant stored with the chosen
reflector.
1200