38.5.2
DET C SYS
Transformation
Results,
Position page
Determine Coordinate System - Normal
Results for Onestep and Twostep Transformations
Results of the transformation between the WGS 1984 datum and the local datum are shown
for each of the transformation parameters. This screen consists of the Position page and
the Height page. The explanations for the softkeys given below are valid for the pages as
indicated.
CONT (F1)
To return to DET C SYS Step 4: Check Resid-
uals.
SCALE (F4) or PPM (F4)
Available on the Position page. To switch
between <Scale:> displaying the true scale
and displaying the ppm.
RMS (F5) or PARAM (F5)
To switch between the root mean square
values of the parameters and the actual
parameter values. The name of the screen
changes to DET C SYS Transformation
Results rms when displaying rms values.
PAGE (F6)
To change to another page on this screen.
TPS1200
867