Leica TPS1200 series Technical Reference Manual page 940

Hide thumbs Also See for TPS1200 series:

Table of Contents

Hidden Point

SHIFT INDIV (F5) for an individual point ID independent of the ID

template. SHIFT RUN (F5) changes back to the next ID from the

configured ID template.

ALL (F1) measures reflector 1 and accesses HIDDEN PT Measure

Reflector 2.

Repeat step 7. for reflector 2 and for reflector 3.

After the last reflector of the hidden point rod is measured,

HIDDEN PT Hidden Point Result, Results page is accessed.

HIDDEN PT Hidden Point Result, Result page

<Point ID:> The name of the hidden point. The configured point ID

template is used.

<Hz:>, <V:> and <Slope Dist:> The calculated horizontal and

vertical angle and slope distance to the computed hidden point. -----

is displayed for unavailable information.

<Ht Diff:> The calculated height difference from instrument to

computed hidden point. ----- is displayed for unavailable information.

<Easting:>, <Northing:> and <Ortho Ht:> The calculated coordi-

nates of the computed hidden point. ----- is displayed for unavailable

information.

NEXT (F5) to store the hidden point and to access HIDDEN PT

Measure Reflector 1.