Leica TPS1200 series Technical Reference Manual page 1110

Setup
Description of fields
Field Option
<Station ID:> Output
<Instrument Ht:> Output
<3D CQ:> Output
<Time at Point:> Output
<RTK Positions:> Output
<Msd PP Obs:> Output
Next step
STOP (F1) to end the point occupation,
STORE (F1) to store the point and then return to SETUP Set Stn & Ori - Setup Method.
TPS1200
SHIFT INIT (F4)
To select an initialisation method and to force a
new initialisation. Available for configuration
sets allowing phase fixed solutions.
Description
Station ID as entered in SETUP Station Setup.
Instrument height as entered in SETUP Station
Setup. SmartAntenna offset is automatically added
but not displayed.
The current 3D coordinate quality of the computed
position.
The time from when the point is occupied until point
occupation is stopped.
The number of GPS real-time positions recorded over
the period of point occupation.
The number of static observations recorded over the
period of point occupation.
Available only when the recording of static observa-
tions is configured. Refer to "22.6 Logging of Raw
Obs" for details.
1110