Leica TPS1200 series Technical Reference Manual page 1272

Survey Cross Section
Step Description
20. START (F4) to open the template.
21. Go to the beginning of the first cross section.
22. ALL (F1) to measure and store the element.
23. Repeat steps 22. for the remaining four elements.
24. Go to the position for the next cross section.
<Dist To Last:> displays the interval.
Since working in ZigZag mode, the next cross section starts "at the
end", this means with TB2.
25. Continue until all cross sections are surveyed.
26. END (F4) to close the template.
27. SHIFT QUIT (F6) to quit the screen.
TPS1200 1272
Refer to
chapter