Leica TPS1200 series Technical Reference Manual page 1228

Survey - Auto Points
Description of fields
Field Option
<Point Code:> Choicelist
<Code:> User input
<Code Desc:> Output
<Attribute n:> User input
TPS1200
PAGE (F6)
To change to another page on this screen.
Description
The thematical code for the offset point.
Available for <Thematc Codes: With Codelist>. The
setting for <Show Codes:> in CONFIGURE Coding
& Linework determines if either all codes or only
point codes are available. The attributes are shown
as output, input or choicelist fields depending on their
definition.
The thematical code for the offset point.
Available for <Thematc Codes: Without Codelist>.
Codes can be typed in but not selected from a
codelist. A check is performed to see if a point code
of this name already exists in the job. If so, the
according attributes are shown.
Available for <Thematc Codes: With Codelist>. The
description of the code.
Available for <Thematc Codes: Without Codelist>.
Up to three attribute values can be stored.
1228