Working Example - Leica TPS1200 series Technical Reference Manual

Reference Line
42.7.2
Description
Diagram
Requirements

Working Example

Application:
Reference line/arc:
Working technique:
P1
GPS12_133
• A new reference line needs to be created and saved with the job.
• <Write Logfile: Yes> in REFLINE Configuration, Logfile page.
TPS1200
The positions of bore-holes need to be staked out in a regular
grid over the area of a site to be used for landfill.
Two known points on the site can be used to define the reference
line.
set <EDM Mode: Tracking> and <Automation: LOCK> in
CONFIGURE EDM & ATR Settings.
d2
d1
P0 Start point
P0
P1 End point
d1
d2
<Increment By:>
<Line Offsets:>
1022