46.4.6
Description
Access
STAKEOUT
Difference Limit
Exceeded
Stakeout
Stakeout Difference Limit Exceeded
If configured a check is made on the horizontal and/or vertical coordinate distance from the
staked point to the point to be staked when storing a staked point. Refer to "46.3 Configuring
Stakeout" for information on configuring the check and the limits.
The screen shown below is accessed automatically when the staked point is stored if either
of the configured difference limits are exceeded.
The availability of the fields depends on the configured <Stake Mode:> and <Use DTM:>.
For example for <Use DTM: DTM only>, position relevant fields are unavailable.
The limits that have been exceeded are shown in bold and indicated by a .
BACK (F1)
To return to STAKEOUT XX Stakeout without
storing the point. Staking out of the same point
continues.
STORE (F3)
To accept the coordinate differences, store the
point information and return to STAKEOUT XX
Stakeout.
SKIP (F4)
To return to STAKEOUT XX Stakeout without
storing the point. According to filter and sort
settings the subsequent point in <
Job:> is suggested for staking out.
TPS1200
Stakeout
1195