Leica TPS1200 series Technical Reference Manual page 1126

Hide thumbs Also See for TPS1200 series:

Table of Contents

Set Stn & Ori -

Known BS Point,

Press CONT (F1) to access SETUP Set Stn & Ori - Known BS Point.

To set the station and orientation and exit the

Setup application program.

To measure the distance to the backsight point.

GPS (F4) (Applicable when using SmartPole)

To enter the GPS Survey screen (the same

screen as for SmartRover) and measure a

point with GPS. The antenna height is automat-

ically converted from the reflector height.

Press STORE (F1) to store the point and leave the

GPS Survey screen. The point is stored to the

<Job:> and copied to the <Fixpoint Job:>,

where it can be used as a backsight.

Press ESC or SHIFT QUIT (F6) to leave the GPS

Survey screen.