Set Azimuth - Leica TPS1200 series Technical Reference Manual

Hide thumbs Also See for TPS1200 series:

Table of Contents

Requirements

Hz measurements

Access step-by-step

Set Azimuth

For TPS1200 the position coordinates of the station point are required. The instrument is

set up and oriented to either a known or unknown target point, to which a true or assumed

azimuth is set.

For SmartStation the position coordinates of the station are unknown and are determined

with GPS real-time. The instrument is set and oriented to either a known or unknown

target point, to which a true or assumed azimuth is set.

A station setup using this setup method is always automatically flagged with an 'update

later' attribute. Therefore, all angle measurements taken from that station are always

automatically updated.

This screen can be accessed from the SETUP Station Setup screen or by pressing

SETAZ (F5) in the SURVEY Survey screen. The step-by-step description is for access

from the SETUP Station Setup screen.

Refer to the stated chapter for more information on screens.

Press PROG to access the Programs menu.

Select and activate Setup to move to the first screen.

Press CONT (F1) to access SETUP Station Setup.

<Method:> Ensure that Set Azimuth is selected.

<Station Coord:> Select the source for the instrument station coordinates.

<Station ID:> Enter/Select the instrument station.