Stakeout
Coding of staked points
Codes can be attached to staked points. Refer to "8 Coding" for information on coding. The
behaviour of the coding functionality depends on the
•
selected <Stakeout Job:> as the job with the points to be staked.
•
selected <Job:> as the active job.
•
definition of a display mask with input fields for coding and attributes.
IF <Stakeout Job:> and
<Job:>
are identical
are identical
are not identical
are not identical
TPS1200
AND a display mask
for point codes and
attributes
is used
is not used
is used
is not used
THEN
the point code and attributes
attached to the point to be staked
are suggested for the staked point.
They can be changed.
the staked point is stored with the
point code and attributes attached
to the point to be staked.
<Point Code: <None>> is
suggested. It can be changed and
attributes can be entered. After a
point has been stored with a code
different to <Point Code:
<None>> then the last used point
code is suggested the next time.
the staked point is stored with
<Point Code: <None>>.
1160