Accessing Reference Line - Leica TPS1200 series Technical Reference Manual

42.2
Access
The Begin screen
Reference Line

Accessing Reference Line

Select Main Menu: Programs...\Reference Line.
OR
Press PROG. Highlight Reference Line. CONT (F1).
Refer to "35.2 Accessing the Programs Menu" for information on the PROG key.
OR
Press a hot key configured to access the screen REFLINE Reference Line/Arc Begin.
Refer to "2.1 Hot Keys" for information on hot keys.
OR
Press USER. Refer to "2.2 USER Key" for information on the USER key.
CONT (F1)
To confirm the selections and to continue with
the subsequent screen.
CONF (F2)
To configure the Reference Line application
program. Refer to "42.3 Configuring Refer-
ence Line".
SETUP (F3)
To set up station. Accesses SETUP Station
Setup.
CSYS (F6)
To select a different coordinate system.
TPS1200 949