Leica TPS1200 series Technical Reference Manual page 1183

Stakeout
Field Option
<CUT:> Output
<FILL:> Output
<Height:> or <Ht:> Output
Description
The negative height difference from the height of the
current position to the height of the point to be staked.
The value for <Height Offset:> configured in
STAKEOUT Configuration, Heights page is taken
into account. Move down.
The positive height difference from the height of the
current position to the height of the point to be staked.
The value for <Height Offset:> configured in
STAKEOUT Configuration, Heights page is taken
into account. Move up.
Available for <Edit Height: No> in STAKEOUT
Configuration, Heights page.
The height of the current position is displayed as
orthometric height. If the orthometric height cannot be
displayed, the local ellipsoidal height is displayed. If it
is not possible to display the local ellipsoidal height,
the WGS 1984 height is displayed. The value for
<Height Offset:> configured in STAKEOUT Config-
uration, Heights page is taken into account.
TPS1200 1183