44.2.6
Description
Access
SETS
Calculate XX,
XX Set page
Sets of Angles
Calculations - Calculating Angles and Distances in Two Faces
For two and more sets measured with angles and distances in two faces calculations can be
done for angles and distances. For sets measured in one face the results can be viewed but
no calculations are done. Refer to "44.2.8 Calculations - Viewing Results in One Face" for
more information.
Highlight Calculate Angles in SETS Sets of Angles Menu and CONT (F1).
The softkeys are the same for vertical angles, horizontal angles and for distances.
CONT (F1)
To access SETS Sets of Angles Menu.
MORE (F5)
To view results of calculation.
PAGE (F6)
To change to another page on this screen.
TPS1200
1075