Leica TPS1200 series Technical Reference Manual page 1012

Reference Line
Step Description
10. REFLINE Enter Offset Values
<Point ID: CL1>
<Stake Offset: 5.20000>
<Along Arc: 2.0000>
<Height Offset: 0.0000>
11. CONT (F1) to REFLINE XX Stakeout, Ref XX page.
12. REFLINE XX Stakeout, Ref XX page
Depending on the configuration of the staking options in REFLINE
Configuration, General page, the graphical display and the values
in the fields indicate how to find the point to be staked. The values are
updated constantly.
13. ALL (F1) measures and stores the point.
The results are displayed on the screen.
It may happen that a point with the same point ID exists in the job. If
the codes and/or attribute values of the new and the existing point do
not match, a screen opens where they can be corrected.
14. Are more points to be staked?
• If yes, continue with step 15.
• If no, continue with step 17.
15. REFLINE Enter Offset Values
TPS1200 1012
Refer to
chapter
42.6
42.6