Leica TPS1200 series Technical Reference Manual page 1218

Survey - Auto Points TPS1200
STOP (F1)
To end recording of auto points and offset
points if configured or, for <Log By: User
Decides>, to end the chain to which the auto
points are assigned..
REC (F3)
Available for STOP (F1). To store an auto point
at any time.
OFST1 (F4)
To configure recording of the first type of offset
points. Refer to "48.4 Offset Points of Auto
Points".
OFST2 (F5)
To configure recording of a second type of
offset points. Refer to "48.4 Offset Points of
Auto Points".
PAGE (F6)
To change to another page on this screen.
SHIFT CONF (F2)
To configure auto points. Refer to "48.2 Config-
uring Auto Points".
SHIFT QUIT (F6)
To exit the Survey application program. Point
information logged until pressing SHIFT QUIT
(F6) is saved in the database.
1218