Leica TPS1200 series Technical Reference Manual page 1223

Survey - Auto Points
P5
P3
d1
P1
d2
TPS12_167
Three or more auto points
The first offset points are computed perpendicular to the line between the first and the
second auto point.
The last offset point is computed perpendicular to the line between the last auto point and
the one before.
All other offset points are computed on a bearing. The bearing is half of the angle between
the last and the next measured auto point.
P2
P6
P4
TPS1200
P1 First auto point
P2 Second auto point
P3 First offset point for P1
P4 Second offset point for P1
P5 First offset point for P2
P6 Second offset point for P2
d1 Horizontal offset to the left
d2 Horizontal offset to the right
1223