Leica TPS1200 series Technical Reference Manual page 1096

Setup
Description of fields
Field Option
<Job:> Choicelist
<Coord System:> Output
<Codelist:> Choicelist
Output
<Config Set:> Choicelist
<Reflector:> Choicelist
<Add. Constant:> Output
TPS1200
Description
The active job. All jobs from Main Menu:
Manage...\Jobs can be selected.
The coordinate system currently attached to the
selected <Job:>. A coordinate system is required for
a station setup with GPS.
No codes are stored in the selected job. All codelists
from Main Menu: Manage...\Codelists can be
selected.
Codes have already been stored in the selected job.
If codes had been copied from a System RAM
codelist, then the name of the codelist is displayed. If
codes have not been copied from a System RAM
codelist but typed in, then the name of the active job
is displayed.
The active configuration set. All configuration sets
from Main Menu: Manage...\Configuration Sets
can be selected.
The reflector currently set in the selected configura-
tion set. All reflectors from Main Menu:
Manage...\Reflectors can be selected.
The additive constant stored with the chosen
reflector.
1096