Step 3) Computing The Volume - Leica TPS1200 series Technical Reference Manual

Volume Calculations
52.4.3
Description
Access
VOLUMES
Compute Volume

Step 3) Computing the Volume

To calculate a surface by establishing a triangulation (triangulation method: delauny) of the
measured surface points.
To compute the volume of the triangulated surface by using either:
• the stockpile method,
• an elevation plane as a reference,
• a single point as a reference.
Refer to "52.2 Accessing Volume Calculations" to access VOLUMES Compute Volume.
TPS1200
CALC (F1)
Computing the volume and access to the
VOLUMES Volume Calculation Results
page. (F1) changes to CONT.
SHIFT CONF (F2)
To access VOLUMES Configuration.
1314