Leica TPS1200 series Technical Reference Manual page 838

Determine Coordinate System - General
DET C SYS
Configuration,
Classic 3D page
Field Option
None
1/Distance
Multiquad-
ratic
Next step
PAGE (F6) changes to the Classic 3D page. Refer to paragraph "DET C SYS Configuration,
Classic 3D page".
The settings on this page define the parameters to be used in a Classic 3D transformation.
Refer to "10.2 Terminology" for more information about how many transformation parame-
ters are needed, based on the number of points common to both datums.
IF the value for a THEN the value for this parameter will be
field is
----- calculated.
any number fixed to that value.
TPS1200
Description
No distribution is made. Residuals remain with their
associated points.
XX
Distributes the residuals according to the distance
between each control point and the newly trans-
formed point.
Distributes the residuals using a multiquadratic inter-
polation approach.
838