Leica TPS1200 series Technical Reference Manual page 951

Reference Line
Field Option
<Config Set:> Choicelist
<Reflector:> Choicelist
<Add. Constant:> Output
Next step
IF the Reference THEN
Line application
program
is to be accessed CONT (F1) accepts the changes and accesses the Reference Line
application program. Refer to "42.4 Starting Reference Line".
is to be configured CONF (F2). Refer to "42.3 Configuring Reference Line".
Description
The active configuration set. All configuration sets
from Main Menu: Manage...\Configuration Sets
can be selected.
The active reflector. All reflectors from Main Menu:
Manage...\Reflectors can be selected.
The additive constant stored with the chosen
reflector.
TPS1200 951