Setup
SETUP
Set Stn & Ori -
Known BS Point,
Stn Info page
Next step
IF
the next page is to be accessed
the station and orientation is to be set
This screen has the same functionality as SETUP Set Stn & Ori - Set Azimuth, Stn Info
page. Refer to "45.6.2 Set Azimuth" for further information. Refer to "7.5.3 Editing a Code"
for further information on coding.
Next step
IF
the next page is to be accessed
the station and orientation is to be set
TPS1200
THEN
PAGE (F6) changes to the Stn Info page.
SET (F1) to set the station and orientation.
THEN
PAGE (F6) changes to the Setup page.
SET (F1) to set the station and orientation.
1130